|
|
Micro P.Hand.M.Vandc.Ando.R.P Analyzer |
Supplied with Combination Glass pH Electrode (0-70ºC), Standard Buffer Tablets, Electrode Stand with Clamp, Dust Cover, Power Cord, Operational & Instruction Manual, Manufacturer Test Certificate & Warranty Card
Technical Specifications :
- pH Range : 0-14 pH
- Resolution : 0.01 pH
- Temperature Range : 0.0 to 100ºC (Manual Compensation)
- Display : 31/2 Digit LED Display
- Power Supply : 230VAC ±10%, 50 Hz
Salient Features :
Calibration check facility & Calibration Error indication for 7.00 & 4.00 pH
|
|
|
|
|
Conductivity And T.D.S And Resistivity And c Analyzer |
Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand with Clamp, Dust Cover, DC Adaptor, Operational & Instruction Manual, Manufacturer Test Certificate and Warranty Card.
Technical Specification :
Conductivity Range : 0 to 20.00, 200.0, 2000 µS/Cm; 2 to 20.00, 200.0 ms/cm
Conductivity Resolution : 0.001,0.01,0.1 µS/cm & 0.01, 0.001 mS/cm
TDS Range : 0 to 10.00, 100.0, 1000 ppm; 10.00, 100.0 ppt(1ppt=10,000ppm)
TDS Resolution : 0.001, 0.01, 0.1 ppm & 0.001, 0.01ppt
Range Selection : Auto / Manual Ranging
- Temperature Range : 0 to 130.0ºC
- Temperature Resolution : 0.1ºC
- Temp. Compensation : Automatic & Manual
- Temperature Coefficient : 0-10.000 % per ºC (Adjustable)
- Suitable Cell Constant : 0.1, 0.5, 1.0 K
- Adjustable Cell Constant : 0.09 to 1.1 K
- Cond. to TDS Conv. Fac.: 0.40000 to 1.00000 (Adjustable)
- Backlit LCD Display : 16 x 2 line Alphanumeric
- Printer Capability : Yes - Parallel Port
- Power Requirement : DC Adaptor
|
|
|
|
|
Karl Fischer Titrator |
Supplied with 250ml Reaction Vessel, Auto Burette (25 x 0.1ml), 500ml Amber Color Reservoir, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly for holding, Electrode, Moisture Trap, Actuator Assembly, Operational & Instruction Manual and Manufacturer Test Certificate.
Optional :
- Calibrated 25 ml Auto Burette having Min.Graduation of 0.1ml with Certificate
- Auto Drain of Reaction Vesselm
|
|
|
|
|
Meltingandboiling Point Apparatus |
Supplied with Melting Capillary one end sealed (Pack of 100 Nos) , Power Cord and Operational & Instruction Manual and Warranty Card.
Technical Specification :
Detection Principal : Automatic by photocell
Temperature Range : 5ºC Above Ambient to 400ºC
Heating before set point : Automatic Temperature Heating depending upon temp. diff.
Heating after Set point : Variable 0.5, 1.0 & 2.0 ºC - Selectable
Detection of Melting : a) Melting Point b) Melting Range
Oven Controller : Microcontroller Based
- Temperature Resolution : 0.1ºC
- Calibration : Multi Point Calibration Standard - as per Pharmacopia or Any users known standard.
- Max. Heating Time : Less then 10 Minutes from 50ºC to 350ºC
- Max. Cooling Time : Less then 10 Minutes from 350ºC to 50ºC
- Melting Capillary : One Capillary (Single Channel)
- Accuracy of Temp.:
- Ambient +10ºC to 100ºC………… ± 0.2ºC.
- 101ºC to 200ºC …………. ± 0.4ºC.
- 200ºto 350ºC …………….. ± 0.5ºC.
|
|
|
|
|
Digital Flame Photometer Modelflamecal |
Supplied with two filters (Na and K) , 2 1/2 Digit LED Display, Oil Free Air compressor, Air Filter with Pressure Regulator & Gauge, Atomizer Tube, Gas Lighter, Sample Beaker (05 Nos), LPG Tube, Air line PU Tube etc
Technical Specification :
Range : Na, K, & Li :1-100 ppm and Ca:15-100 ppm
- Sensitivity : Na, K, & Li :0.5 ppm and Ca:15 ppm
- Linearity : < 3%
- Reproducibility : 2% CV for 20 samples
- Detector : Photo Cell
- Ignition System : Manual Ignition
- Flame System : LPG & Dry Oil Free Air
- Gas Control : Adjustable with Knob
- Automiser : Axial Flow Type
- Oil free Air Compressor : Supplied with Built-in Air Filter with Pressure Regulator & Gauge to deliver stable and moisture / oil free air supply.
- Power Supply : 230 VAC ±10%, 50 Hz
|
|
|
|
|
Gas Handling And Purification System |
Nitrogen Gas Line Consist of :
- Moisture Filter consist of Molecular Sieve - 13X & Silica Gel, Length : 11"
- Regenerable Type Indian Oxytrap
- Inlet & Outlet Machine Sealed Type Stainless Steel Pressure Gauge
- Brass Chrome Plated Pressure Regulator with SS Diaphragm
- Brass Chrome Plated On/Off Valve
|
|
|
|
|
Laboratory Gas Generators |
Tecnical Specifications :
- Moisture Content < 2 ppm
- Oxygen < 5 ppm
- Total Hydro Carbon < 0.3 ppm
- CO & CO2 < 2 ppm
- Purity of Gas : UHP / GC Grade
- Micron Particulates < 0.01 Micron
- Capacity of Gas : 300 ml/Min at 6 kg/cm & 800 ml/Min at 6 kg/cm
- Method of Purification : Pressure Swing Adsorption (PSA)
- Room Temperature : 5 - 30ºC
- Supply : 230VAC ± 10%,50Hz
|
|
|
|
|
Exhaust Flame Hood |
Consist of :
- SS 304 100 mm dia Pipe with Flange : 3 mtrs
- SS 304 100 mm dia Bend with Flange : 01 Nos
- Canopy with Adjustable CFM : 01 No having
- Dampener : 01 No CFM can be controlled with help of dampner.
- Blower with Motor : 01 Nos
|
|
|
|
|
Ultrasonic Bath (Sonicator) |
- Electric Supply : 170 – 245 VAC 50Hz Single Phase
- Ultrasonic Power : As per Model watts average, 1000 Watts peak (with heater)
- Ultrasonic Frequency : 33 +/- 3 KHz
- Ultrasonic Generator : Micro Controller base Digital Timer.
- With latest MOSFET base technology.
- With Auto Degassing facility.
- Automatic frequency tuning for maximum output
- Modular generator for easier modification/servicing.
|
|
|
|
|
|
|
|
|